home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
TECHNICA
/
1181.ZIP
/
README.TXT
< prev
next >
Wrap
Text File
|
1987-12-07
|
4KB
|
67 lines
README.TXT CC-SURVeyor 2.00 Shareware Version January 1, 1988
CC-SURVeyor is a COGO program for civil engineers and land surveyors,
that interfaces with Generic CADD by transferring batch files both
ways. It allows points, point numbers and lines to be created from
maps of record or legal descriptions, so that Generic CADD could
quickly load the boundary, allowing the civil designer to get started
with building layout or lot layout within CADD. It includes traverse,
inverse, sideshot, bearing and distance intersection routines, area,
inscribe curve, rotate/translate/scale, lot summary, radial stakeout,
predetermined area, and perpendicular and parallel offsets.
A set of topo utilities allows reduction of field notes for EDM or
total station topo, with transfer of points, numbers, elevations and
descriptions to Generic CADD.
This shareware version is complete in every way, except that point
numbers are limited to 1 thru 99. The manual on the diskette is
complete and accurate with that one exception. The files distributed
in this version are otherwise identical to the registered version.
You are free to use, copy and distribute this program, as long as
copies contain all the files herein, and no more than a $6 diskcopy
fee is charged. If you like CC-SURVeyor and wish to register it, a
$75 contribution will entitle you to:
1. A new diskette with the latest version, including 999 point
storage capacity and excluding the shareware entrance screen.
2. Full support by mail.
3. Subscription to CCNEWS, an electronic bulletin board newsletter
with the latest news of civil engineering and surveying shareware
and public domain software, including news of CC-SURVeyor
upgrades.
SYSTEM REQUIREMENTS AND INSTALLATION
This program was developed and compiled with QuickBASIC, version 3.0
and should be compatible with any IBM PC compatible using MS-DOS 2.11
or later. An 8087 coprocessor is not required.
To install CC-SURVeyor, simply copy the *.EXE files (CC-SURV.EXE,
CC-TOPO.EXE, BRUN30.EXE) onto the diskette or hard disk subdirectory
of your choice. Type "CC-SURV" to start it. Neither CC-TOPO nor
BRUN30 are intended to be run alone. CC-TOPO is an overlay for the
Topo submenu, and BRUN30 is the MicroSoft run time module that
must be present to run programs compiled with QuickBASIC 3.0. If you
already have BRUN30 on your hard disk, you don't have to install it
again as long as it is in the current PATH when CC-SURVeyor is run.
FILES ON THIS DISKETTE
README.TXT This file you are reading
CC-SURV.TXT The program manual
CC-SURV.EXE The CC-SURVeyor program
CC-TOPO.EXE The TOPO/FIELD submenu
BRUN30.EXE QuickBASIC run-time module
DEMO.CCC Coordinate file created by CC-SURVeyor
DEMO.TXT Generic CADD batch file created by CC-SURVeyor
CONFIG.FIL Configuration file for Generic CADD. See CC-SURV.TXT
SURV.FNT Font file for Generic CADD with surveying symbols
VIDEO.MNU. Video menu for Generic CADD with added menu items.
You may print out CC-SURV.TXT by typing "COPY CC-SURV.TXT PRN" from
the A> DOS prompt. Don't worry about the left margin or page breaks,
as they are taken care of in the TXT file. Just be sure your printer
is set to top of form before printing, and you have at least 34 pages
of paper ready.